Designed specially for Pitts S-1S, S-1T, S-2A, S-2S, S-2B and Christen Eagle aerobatic aircraft.
It can also be used on other aerobatic aircraft if the horizontal stabilizer , elevator, vertical fin and rudder spar is made from a 7/8 inch diameter tube with at least 1/8 inch gap and is equipped with strap hinges.
NOTE; PIN HINGES WILL NOT WORK.
Various aerobatic homebuilt aircraft such as the Pitts S-1C, Stephens Acro, Laser, and Skybolt have used this Gap Seal system.
The Gap Seal comes in 3 foot strips, it is cut and glued to the trailing edge of the Horizontal Stabilizer and vertical fin. Any good quality contact cement (Pliabond, Weldwood Contact Cement, 3-M Weather Strip Cement) is used to bond the Gap Seal to the trailing edges.
Cost;
$72 for Pitts S-1C, S and T, $96 for Pitts S-2A, S, B and Christen Eagle
Add $8 for shipping and handling within US and Canada, $25 overseas.
Cost for Other aircraft-
Determine how many 3 foot strips are required for your aircraft, the cost of each strip is $24.
Add $8 for shipping and handling within US and Canada, $30 overseas.
MAIL CHECK OR MONEY ORDER TO:
NO C.O.D. OR CREDIT CARDS
RIHN AIRCRAFT CORP.
4357 Candleberry Ave
Seal Beach, CA 90740
Return to Rihn Aircraft Corporation Home Page