(2/22/06) Pietenpol project for sale. Fuselage open, tail feathers covered, wing panels covered. About $5000 materials in it so far. Have landing gear wheels and axles not attached yet. Polyfiber is expensive stuff. Save yourself a lot of work. You can change anything in the structure easily you don't like. Also got plans, books galore, a 1962 - 90 hp Corvair engine, not yet rebuilt. Catalogues for cam shaft and stuff.
We are retiring to Belize, where we have built in the foothills of the Belize Alps. Cashing in our house and farm here in Miami South Florida. Make an offer? My original plan was to fly it down, but never finished in time.
Ray Auxillou, 2471 NW 152 Terr., Miami Gardens, Fl. 33054 Hope to be out of here in 3 months by May 1st. 2006. You must pickup here. tel: 305 685 9752
buildingbelize@centralpets.com
More here.
(1/28/06) For Sale GN-1 $7500 For Immediate Sale
Sport Pilot Ready, N46781, 1100 SMOH Cont A-65, 175 TTA, email for pics, will deliver in PacNW. Bret Files, 541-523-5663 or bfiles172@yahoo.com
(11/21/05) For Sale; Homebuilt airplane plans. Two different.
1. Blueprints for Peitenpol Drawn in 1933 by Orrin Hoopman. $75.00 U.S.
2. Early Bird "Jenny" Plans and building instructions; $75.00. .U.S.
Will consider all offers; Details email me at
b29chevy250@aol.com
(11/21/05) SOLD (9/19/05) For Sale Pietenpol: Steel Tube Fuselage, All Wing Ribs completed, 2 Corvair Motors, Motor Plans, Plans, Video, $1,000.00 o.b.o.
Paul Schultz Kingsford, MI 49802
(906) 774-8900 W -- (906) 774-9781 H
pauls@chartermi.net
(9/5/05) For Sale I have a Pientenpol project for sale. Near completion and nicely built of sitca spruce. Also Franklin 90 hp engine for sale. Many pictures available. $4000.00 obo.
Telephone Maureen at 313-330-6913 (cell) or email MAUREENGPW@aol.com
(5/12/05) For Sale Grant,
I have a Model "A" engine with 80 flying hours on it, probably that many
more ground hours, that was rebuilt with new pistons, valves, and
re-babbitted before I bought it. It only had 10 hours on it when I
bought the Pietenpol in 2002. I have put the rest of the time on it. I
am in the process of replacing the Ford with an O-200 and would be
willing to sell the Ford engine, mount, radiator, radiator mount, and
Wico-mag that mounts in the distributor hole.This is a strong engine,
100 thousands over size pistons and a police head of about 6 to 1
compression. I've thought about putting it in a car, and may end up
doing that. I have a Sterba prop, a 76/44, that cruised me at 65 to 70,
depending on the temperature. Anyone would have to re-bore the mounting
holes as I filled them with dowels and T-88, thinking I would re-bore
it for the O-200 hub, but Ed Sterba changed my mind when we discussed
it. So, I have a fire-wall forward model-A for any interested party for
$3000.
Tom Lester jeanlester@ntown.net
865 577 0892
(4/22/05) Wanted Partially complete Pietenpol Air Camper project.
Interested in quality construction w/quality materials.
Wayne (952) 758-6246 or rademacher@bevcomm.net
(2/24/05) For Sale GN-1 project with metel fuseluge, left to finish is fabric, instruments, lift struts, and brakes. All materials have been aircraft
grade, rebuilt Corvair engine, Sterba prop, Cub wheels, coil spring gear.
$3200. Contact monyon@surfglobal.net or (802) 874-7068
(11/29/04) SOLD Original 1932 Pietenpol Scout For Sale To A Good Home. This is the one and only Model A Scout Mr. Pietenpol built. He owned and flew it for two years. NX12941 is well known, and had long ago been on display at the old EAA museum in Hales Corners. Recovered 1994/95 by Gar Williams. 7 hours since major by a professional shop (H&H). New Slick Mag. Logs signed and verified by BHP. Early photographs, and original wood data plate ... a real piece of flying history. Located Brodhead, WI. $19,500 obo. contact Larry at 704-896-9091 or Flyharm@aol.comFlyharm@aol.com
(10/30/04) SOLD Pietenpol 444MH - built by Howard Henderson. Excellent condition. Written up in Sport Aviation.
Model "A" Ford powered, flies and runs great. Has brakes and tailwheel. Can be flown off
of paved strips
Reason for selling: Buying C150 to train my boys to fly.
Price: $10,500
Contact Joe Santana
39 Lockheed Blvd -- Waynesboro VA 22980
Hm. (540) 943 3061
Cell (540) 836 0003
Email joeanddawn@ntelos.net
(7/8/04) An IMPORTANT Announcement:
Dates for Brodhead '04 have been announced. Check it our
HERE!
(11/04) SOLD,(7/8/04) For Sale, Pietenpol, very good cond, 650 TTAE, new paint, new instrument panels front and back, duel throttles and mixture, duel fuel tanks, one piece wing, new stits fabric in 93, always hangered, 90 hp Franklin with starter , overhauled prop, piper gear with hydraulic breaks, duel controls new interior and upholstery ,intercom, new windshields, fresh annual, really fun to fly. Pictures available. $9,999 firm. Sutter Creek CA.
Chris McKeage, 209-267-5090
CMckeage@amadorwa.com
(4/12/04) For sale
My name is Mike Ducar.
I fly out of McVille PA (P37),
I have a Continental A-65 with "0" hours.
The local A&P at McVille was previous owner. SN plate is on the engine and I have the log book to back up engine's history. Price is $5,400.00
Home phone: (724)224-5054
Cell phone: (724) 882-7730
Work phone: (412) 826-3737
E-mail: ducarmikej@aol.com
Thanks, Grant.
(3/31/04) For sale I have a disassembled Continental A-65 without carb
and mags and would take $600. Also, a steel tube
fuselage with split axle landing gear and steerable
tail wheel assembly for $1800. Will take $2200. for
both.
James Frazier
304/275-4510 or
ajfrus@yahoo.com
(3/16/04) For sale 1962 Corvair engine, great running engine when removed from car $160.00 -
B17? seats(2) $150.00 each - Tailwheel $35.00. - Pietenpol plans best
offer, more misc parts. Can email pictures of items of interest.
BBar149048@cs.com -
brian.bartter@med.ge.com
920-625-3495
Neosho, Wisconsin.
(3/24/04) S O L D (3/4/04) For Sale - GN1 Grega project
80% complete Fuse
J-3 Landing Gear
Cleveland 4" Wheels/ Disc Brakes
O-200/C90 Engine Mount
Stainless firewall
Maule Tail Wheel assy.
J-3 fuel tank
J-3 lower cowling
Complete control stick assy.
Complete premium grade Sitka Spruce Wing Kit (w/ 16 completed ribs)
Die/Laser cut & TIG welded fittings
Misc. Hardware
Misc. Wing Jigs
Workmanship of this project is very nice. Many pics can be seen here:
imagedv.com/aircamper/log/image-pages/03-02-04b.htm
$2450. Will deliver up to 150 miles.
DJ Vegh
N74DV
Mesa, AZ
djv@imagedv.com
(2/1/04) Wanted - Governor housing for Model "A" Ford engine. (old farm equipment)
Ron Jewel
636-227-2060 or
jonnierule@aol.com
(2/23/04) Thanks for running the ad re: the Corvair engine I had in Gardena, CA.
I ended up shipping it to SC. Since then, I've found quite a few Corvairs after initially finding none on a junkyard network search. Turns out many junkyards aren't members of the network.
Anyway, you can pull the ad as the engine is now on the east coast. I have gotten a number of inquiries, so your site is effective. Thanks.
David Culp
(11/11/03) For Sale Corvair engine
I bought a Corvair engine on ebay. Then found out how much it would be to ship it to the east coast (ok, not the smartest way to go about it).
To make a long story short, I'm willing to sell this Corvair engine cheap to anyone who will pick it up.
The engine is in Gardena Calif. 90249.
David Culp
DavidC9816@aol.com
(11/11/03) For Sale Piet Project
Grant,
I'm in the process of moving to the western US and need to sell my pietenpol project. I hope you can help me and list this on your web page.
I have the fuselage (75% complete), all the tail assembly (I used preformed edges from Wicks), 5 completed wing ribs and the rib jig, extra wood, precut pieces, plans, and misc info.
I've put a great deal of care into this project, over 300 hours and it is well built. It would be easy to finish from this point.
I'm will sell it all for $1,400.00. I can be reached at 740-387-2438 or
billandsusan@marion.net.
Thank you very much,
Bill Anderson
(11/08/03) Wanted 0-145 Motor Mount
Hello!! I would like to find out how I can place an add for a J-3 motor mount for my GN-1 O-145? It currently has a modified Corvair mount which makes it too low for the J-3 cowling. I'm a BPA member and have just learned about this site. Have enjoyed it thoroughly!! Thanks, Pete Steinbacher
psteinbacher@prodigy.net
(1/23/04) SOLD (11/4/03) GN-1 Project For Sale - Fuse, Ribs, Cont. motor mount, 3 pc. center wing section, some hardware. $450. Greg Menoche GNWAC@CS.COM cell 302 462 5251
(10/21/03) Wanted
Dear Grant,
I have a Pietenpol Air Camper with a model "A" engine. I am considering
changing to a Continental 65 and would be interested in a mount if
anyone has one for sale.
Tom Lester
3829 Maloney Rd.
Knoxville, TN 37920
865 577 0892 or jeanlester@ntown.net
(10/20/03) Wanted
Looking for a Piet long fuselage project, any stage of completion considered.
Thank you!
Jack Textor
Personnel Incorporated
3737 Woodland, Suite 315
West Des Moines, IA 50266
515-243-7687
jack@personnelincorporated.com
(10/19/03) For sale
Hi Grant,
Here is the list of the gauges and stuff I am selling. I can email photos -- let me know -- it will be a couples of days though as my old digital camera broke a couple of weeks ago and my new is not here yet. Please feel free to contact me by email or telephone. I work graveyard shift so do not call until after 3 P.M. west coast time. I am selling everyhing as a package for $2500 plus the exact shipping costs. I will welcome an offer on anything specific. THANKS,
Ted B. Blakeley 503-663-0147 or TBBLakely@cs.com
- 2 Star Pathfinder Compass card holders plus cards..Both are PERFECT
- AF US Army WWII 3 in 1 gauge ... 100 C temp, 200 lb. oil pressure, 25 lb. fuel pressure ... 3 1/8" dia. with sending cable and snap ring in face ... really nice condition
- 4 Lunkenheimer engine primers....3 of which have female fitting to receive the fuel shut-off valve ... good condition
- 6 NOS ( new old stock ) Lunkenheimer primer shut-off valves with the nickle plated handles ... all still in their original package ... PERFECT
- 2 BRAND NEW Essex engine primers ... ( Lunkenheimer shut-off valves will fit both of these )
- 1 UNKNOWN type of engine primer ... very large, has an oval shaped pump handle and also the Lunkenheimer shut-off valve and handle...will need restored
- 1 NEW Reiker 10-10 6" Inclinometer with nlack ball
- 1 NEW Reiker 10-10 6" Inclinometer with steel ball
- 1 antique Reiker 10-10 6" inclinometer with steel ball ... BEAUTIFUL Condition
- 2 1/4" dia. U.S. Gauge 0 to 100 C. temp with sending lead and snap ring in face ... fair to good condition
- 2 1/4" dia. U.S. Gauge ( I think ) 0 to 212 F.temp snap ring in face Fair Condition
- 2 1/4" dia. Pioneer 0 to 120 lb oil pressure, snap ring in face...needs restored
- 2 NOS ( new old stock ) 2 1/4" dia U.S. Gauge 0 to 120 lb. oil pressure gauges.snap ring in face ... PERFECT NEW OLD STOCK
- 2 1/4" dia Consolidated Instruments 0 to 120 lb. oil pressure gauge with snap ring in face..needs restored
- 2 3 1/8" dia. Consolidated Instruments 16,000' counterclockwise altimeters with snap ring in face ... 1 is PERFECT ... the other is in really good condition ... needs new glass in face and ring
- 3" X 12" vacuum venturi ... almost new condition
- 3 3 1/8" dia Kollsman 0 to 3500 RPM tachs with snap rings in face. All 3 have 45 degree drive attach. EXTREMELY good condition
- 3 1/8" dia. Kollsman sensitive altimeter ... snap ring in face ... looks great but needs restored
- 3 1/8" dia. 140 mph ASI, cream face, convex lens and red pointer ... operational and looks great
- 3 1/8" dia Longines ASI...1 revolution is 100 mph..2 times around is 200 ... very unusual gauge ... works great and looks great
- 3 1/8" dia U.S. Gauge 160 MPH ASI, snap ring in face...works great and looks great
- 2 1/4" dia Airpath mount compass ... works and looks good
23. 3 1/8" dia panel mount compass ... brand unknown ... compass card still spins but needs restored
- 3 1/8" dia Consolidated Instruments Magswitch ... looks great and works great
- 3 1/8" dia Bendix Scintilla Type ED-F Magswitch ... looks new abd works great
- 2 1/4" dia Bendix Scintilla magswitch ... looks great and works great
- 2 1/4" dia A.C. Type A-9 magswitch ... works great and looks good
- 2" 8 day Waltham panel clock ... brass ring in face, looks great and works great
- 2" 8 day unknown type aircraft clock with timer ... looks great and works great
- 5 Boston Auto Fuel Gauges as used on the Vultee BT-13. These I taken apart but they they worked great and still all the parts ... very simple to assemble ... even have 3 NOS faces
- 1 Boston Auto fuel gauge and gasket for the P-51D Mustang aux fuel tank ... NOS ( New Old Stock )
- BRAND NEW Rochester fuel gauge ... the type that has the spiral twist that the cork rides up ... BRAND NEW
- new Yellow Airfone antenna
- 1 Antique smooth 10" X 3" B.F. Goodrich Silvertown tailwheel and tire ... very rare GREAT CONITION
THANK YOU!!!
Regards, Ted
(10/11/03) Waanted - Sky Scout project. Ron Jewel St. Louis.
Phone 636-227-2060 or email
Johnnierule@aol.com
(8/18/03) Wanted: Building a Sky Scout and need the following parts; Prop hub to fit a 'C' engine and wire wheels to fit a Sky Scout with an axle hole of 1" or greater. 18" to 20" rim would work. kenneypj@billings.k12.mt.us or call Pat at 406-245-5246.
(8/10/03) Grant, I came across your website while serching for a site for my father to advertise his Pietenpol Air Camper project for sale. Please let me know if you can post this on your website. Here's the info on it. N13708, Dismantled Pietenpol Air Camper Project, EA 81 Subaru engine (55, 000 road miles), Reductions of Canada Re-drive 1.84 ratio, 68" 3 blade aluminum Warp Drive prop with pitch adjuster, exhaust system, fuel pumps, Holley 5200 carb, radiator, coil, alternator, starter, air cleaner, prop hub and spinner, Goodyear tires and wheel parts, hydraulic brakes, engine mount, nose cowl, most side cowl parts, flight & engine instruments, ELT, Sporty's JD 200 transceiver, Always hangared ( to our knowledge) 1991 Airworthiness Cert. w/1999 update. docmuentation and photos available. Asking price: $3500.00 Contact: Owners: Jack M. Maki or Fred E. Maki Granville, OH 343023 Phone 740-587-2819.
(8/4/03) Project for sale: fuselage, tail feathers, & wing ribs done, have all wood to complete, 2 Corvair engines, eng. mount, all metal parts, landing gear, wheels, tires, & brakes, Lots of misc. Supplemental drawings & prints. $4000 obo. Marshall Alexander OKC. email n5kla@aol.com. or cell (405) 417-6077
(Revised 5/19/03) Air Camper for Sale Constructed from 1933 plans. Entire ship of Douglas Fir.
Corvair powered. Full lighted instrument panels, all running lights, both
seats identical wirh red vinyl covers, red carpeted floors, lap belts and
shoulder harnesses. 6 x 6 tires. Goodyear brakes. Center section holds 10
gallons, 9 useable. Extended fuselage. Ship has been test flown 4 times.
Ship was FAA certified May 2001. Phase 1 time still intact. Ad is listed on
Barnstormers with photos. Asking $6000 or best offer.
Contact 973-229-8766 for info and photo request.
Joseph Vinciquarra
(3/16/03) Grant, Please post my Pietenpol project for sale. I have
already moved across the country with the project twice and with a new job
and home and can not finish the project.
The project is 85% complete nearly ready to cover. The Ford 2 liter engine
with reduction drive is hung on the firewall with prop, instruments, and
engine controls partially installed. The project was built to 1933
improved Pietenpol plans. It has a one section wing. Included I have
built a custom trailer to transport the plane (which has been used to
transport the plane across the country twice now). The trailer holds the
fuselage below and the wing on a rack above. Beautiful workmanship ready
for someone to complete and fly. I am asking $8,000. photos are available
on request. I am located in West Haven (near Ogden) Utah and can be
reached at (801)-731-7821.
Email
Jeremy.visker@autolivasp.com or
jvisker@aol.com.
Regards, Jeremy Visker
(2/19/03) Friend, neighbor and Model 'A' Ford Expert Terry Oberer always has a few Model 'A' engine blocks, cranks, cams, pans, etc. for sale. Terry may be reached by phone at 636-677-7201. Or, write him at 3609 Traci Lane, Byrnes Mill MO 63051 for a list. (Include an SASE!) or email him at toberer@netzero.net with your specific needs.
. . . gem
(1/15/03) GN-1 AIRCAMPER PROJECT FOR SALE. FUSELAGE IS ON LANDING GEAR, OUTER WING PANELS ARE COMPLETE, MOST AILERON RIBS ARE COMPLETE (INCLUDES JIG), ALERON WING SPARS, MATERIALS TO COMPLETE MID WING, 5" WHEELS WITH CLEVELAND BRAKES, J-3 MOTOR MOUNT, OLDER STEEL J-3 GAS TANK, MAUL TAIL WHEEL, VERTICAL STABILIZER,AND A LOT OF OTHER ITEMS. ALSO I HAVE A CERTIFIED CONT. 0-200 WITH 3 HRS. SINCE MAJOR MOUNTED TO IT. THE MOTOR IS COMPLETE WITH DUEL SLICK MAGS, CARB., ALTERNATOR AND STARTER. I WILL LET IT ALL GO FOR $7500.00 OR MINUS THE ENGINE FOR $1600.00. I WILL LET THE CONT. 0-200 GO FOR $6000.00. YOU WILL HAVE TO PICK UP IN THE PHOENIX AZ. AREA. E-MAIL WITH QUESTION MAJFLYER@AOL.COM OR CALL 480-983-5566 OR 480-495-5566. I CAN E-MAIL PICTURES. THANKS GRANT, MIKE JACOBSON
(1/11/03) Ron Jewel has S O L D
the Cont. 65 engine mount for a Pietenpol. Phone 636-227-2060 or email
Johnnierule@aol.com
(2/10/03) S O L D (1/7/03) Pietenpol Long Fuselage project for sale. Fly this spring! Fuselage ready
for cover. All instruments and engine controls installed. Wings need leading
and trailing edge to cover. Complete with A65-8, Hegy prop, plumbed and hung
on firewall. Beautiful workmanship, with only Aircraft spruce, mahogany
plywood, 4130 steel, AN hardware, etc. Faithful to plans. $6,000 firm.
Marriage and new home purchase forces sale. Tim Erickson @ (316) 838-1865.
Photos available via post office.
(12/15/02) 5" Cleveland wheels with brake discs, Flight Special tires and tubes. I have
one brake caliper the other one is missing. Set lists for $762 on Wicks.
$375
clawler@ptd.net 800-325-1566.
(12/10/02) Hello Grant,
Great site! I have a Model 'B' engine which was converted and flown in a Pietenpol by the late Bud Dodson. Bud rebuilt and restored many aircraft over the last forty years of his life. Bud was a professional machinest as well as an aircraft mechanic. He built a Pietenpol with the Ford engine, flew it a few times then installed a Continental with considerable more power, which was more to his liking.
I bought the Ford engine at least fifteen years ago & it has been stored ever since. It should be torn down & inspected before someone hangs their life on it. I have not looked at it for years but I think the engine mount is with it.
It costs about $2500 to rebuild a Model 'A' engine now. I would sell this for $1800 US. complete. It is now near Toronto Ontario, if it was of any help it could be delivered to Bazine, KS or Chickesha OK in March 2003.
Thank you,
Jack Innes
jfinnes@speedline.ca
905 655 0000
(12/5 /02) Wanted - Sky Scout project.
Any stage of completion is OK. I just don't want to start another project from scratch.
Thanks!
Larry Williams LNAWMS@msn.com
(12/4/02) For Sale: 1981-82 Ford Escort Engine (1500cc?) with prop reduction unit.
I purchased a Pietenpol Air Camper project with the engine included. I have a Continental to put in it and do not need the Ford engine. The previous owner said that it had 20,000 miles on it when they rebuilt it and had the head checked out. Included are motor mounts.It can be seen at: my.ohio.voyager.net/~dersonan/ptengine.html
If you have any questions, email me at digflying@core.com or you can call me at work at 800-352-7911, ask for Chris Anderson.
$450.00 or offer. (Will deliver in Ohio for an extra $50.00.)
(5/12/03)SOLD (11/29/02) For Sale: Nice GN-1 project. All wood parts of the aircraft are complete, tail feathers, wings, fuselage and a most hardware components including landing gear.
It does need control cable, lift struts and wheels before covering.
I'm asking $4000 with a Lycoming O-145 engine and mount or would take offers without the engine.
I also have a Ford Model "A" engine that has been torn down and inspected but not yet converted and all parts are included. I'm asking $250 for the A engine with a mag.
I also have a Volksplane VP-1 for sale. I have a little over $2500 in the plane but would take $2200 or best offer.
Here is a link to pictures of the GN-1 and the VP-1.
www.gregyotz.com/hanger.htm
Greg Yotz greg@controlvision.com
Burlington KS
(11/27/02) SOLD (11/14/02) Grant, I have a complete set of wing ribs for a Piet that I'm not going to be able
to use. Will you put an ad on the webs site for me? We now have about 450
hours on out Piet C-65. It is a total blast to fly. Getting a little cold in
PA though.
Piet Wing Ribs Complete set. $200 call 800-325-1566.
Thanks
Craig Lawler
clawler@ptd.net
(11/09/02)WANTED Corvair 110HP engine converted for aircraft use.
Contact gpjann@juno.com.
(10/29/02)
Trade for Pietenpol or GN-1.
35' Broadwater cabin cruiser -- classic wood yacht professionally rebuilt 1999.
New AwlGrip paint, varnished mahogany transom, new canvas weather enclosure,
new marine heat and air, new appliances, etc ... beautiful interior.
Located Charlotte, NC. Have moved and must sell. Value $20,000+, but will
trade even for good plane or advanced project or any project plus cash.
We live 7 hours away and cannot take care of boat. Our loss is your gain.
Contact Lou Thurber 252 943 3887 or
louisthurber@aol.com.
(10/3/02) TWO Pietenpol Air Camper fusalages - 2 sets of tail feathers and some extra spruce. I am asking $550 for everything or will sell them separately. Thanks, Ron Silliman Naples FL 941-394-6218
(9/25/02) S O L D (8/29/02) Spuuce fuselage. Built out of beautiful Sitca Spruce. Held together with
"West Systems'" Epoxy. Very carefull and very clean workmanship. Unable to finish due to too many other projects and family activities. I don't expect to recover all my costs, however, I would like to recover some.
I am located about 12 miles or so west of Cleveland, Ohio in a town called
Bay Village. As of this time I don't have any photo but I am in the process of getting some
that I can hopefully send electronically. If interested please contact me via email:
ron@hatcheramps.com or by phone
here at work (440) 871-9090.
(9/24/02) Grant, thankyou for posting my fuselage. It went to a nice fellow down
in WV. He and his wife came up last Saturday and loaded it up. Again
thanks for you help.
Ron Hatcher
(9/29/02) Hi Grant, I have sold the Geo Tracker engine posted on your website.
Please cancel the ad. Thank you for posting it for me. I appreciate it very much. Neill Rabon
(8/14/02) Hi Grant, Could you lower the price of my Geo tracker engine to $2800.00?
I have over twice that much invested, but am moving on to another
project which will require a larger engine, and would like the see the
Geo put to good use.
Thank you very much. I really appreciate your website. Neill Rabon
(5/6/02) S O L D Geo Tracker 4-cyl. inline 1.6L 16-valve engine on C-85 engine mount, complete with Reductions 1.84 to l PSRU, prop hub, crush plate,
Electromotive electronic ignition system. Approx. 5 hours run time on
test stand SMOH. Develops 80 to 90 hp. Very clean unit. Ideal for
Pietenpol Air Camper or GN-1 project. $3500.00. Located central Calif.
Contact Neill Rabon 530-666-3568 or email
coupers2@2xtreme.net.
S O L D (7/14/02) I have a Franklin 90 hp engine removed from a Pietenpol that I would like to sell. It includes carb, mags, starter, generator, engine mount, exhaust and a Sensenich prop. I need $2500 for all. Don Phone: 501.676.7529.
(3/6/03) Grant, I got another call today which reminded me to take care of business. I have sold the Franklin 90hp FWF to a Piet' builder in Fort Smith, AR. Thanks for letting me place the ad. Don Adamson 501-676-7529
(5/28/02) For Sale: Model "A" engine I was saving for an Air Camper. It comes with the Malory ignition and implement exhaust manifold. Engine of course needs converted but has been running recently. Comes complete with intake and carb. I'm asking $250. Thank you again Grant. Mark Schanou 402.435.8684.
(5/23/02) For Sale: 13 Model "A" Engines Some with heads and pans -- some blocks only. Reasonable Prices! Contact Dick Wentura 217.222.3287 or wentura@rnet.com FOB Quincy, IL.
(6/1/02) S O L D (5/16/02) Grant, A friend of mine has a Pietenpol Air Camper for sale. Just
finished this last fall, has 20+ hours flight time on it. He is an accomplished wood AC builder, (Fisher 404, Supercat, Skypup) but evidently this plane is not what he wants.
Model 'A' motor built by a model 'A' specialist, per the Pietenpol plans
except for a higher compression head and a Wico impulse mag. (starts
REAL easy). Tennessee prop, bungee gear, steerable tailwheel. asking
$14,500. contact: Fred Abernathy 765-698-2305 evenings
and weekends. East Central Indiana
Thanks, Tom Robeson
toolman@jmhutton.com
photos-
jmhutton.com/piet.htm
(5/12/02) GN-1 Aircamper for sale. Structure is completed. Wings and tail group covered and thru silver. Fuselage ready for cover. Includes Franklin 90 hp, Sensenich propellor, Narco MK III nav/com, some instruments. Needs plumbing and wiring to finish. Excellent workmanship! Spar signed by Paul Poberezny when project was on static display at AIAA convention. E-mail for photo at thermalbob@aol.comor call 619-466-4279. San Diego area. Thanks Grant, Bob Buckner
(5/5/02) For Sale Grant, I have a modern 1.6 liter Ford Engine that has been converted and is ready to bolt into a Pietenpol. The motor has a starter, prop redrive unit, is rated at 80 to 100 HP. I have the original manual and the motor is located south of Springfield, Missouri. I am asking $1000.00. Thanks,
Walter Allen
walter.allen@NorthstarBattery.com
Work (417) 575-8211
Home (417) 581-8760
(4/16/02) 110 HP Corvair Heads for sale. Completly rebuilt by local machine shop.
All new valves, guides, etc. $800 invested. Will sell for $500 or consider partial trade for Pietentol Continental Engine Mount and/or other Piet parts. terickson@cessna.textron.com or (316) 838-1865"
(4/6/02) S O L D (3/21/02) GN-1 Aircamper Project for sale. It is completely framed on the main gear; wings have been in place using the newly completed wing struts; control cables are in place awaiting final adjustment; and all metal hardware is in place including firewall ready to receive engine (not included). For an interested builder, this should be an easy project to complete. Pictures available. FOB Oroville, California. $950.00 or make offer. Howard T. Fairbanks 530-533-8303; Fax 530-533-6244; email
howard@infostations.net.
(4/6/02) Grant,
I wanted to let you know that the project has been sold and was picked up today and is headed for Arizona. Thank you for your support and I appreciate the work you are doing. We were very pleased with the number of responses that we received since listing the project. The young man that purchased the project was enthusiastic and no doubt will complete it within a matter of months. Thanks again.
Howard
(3/20/02) For Sale 1981 GN1 Aircamper. 100TT Beautiful construction.
Cleveland wheels and brakes, no engine. Comes with Continental engine
mount and cowling. $7500.00 I have many pictures.
Chris Gibson
Technical Services Manager
920-338-6308 (direct)
920-362-6374 (cell)
(3/1/02) Grant, Can you post my 1986 GN1 'Aircamper' on your web site?
This aircraft was ground looped on 02-27-02.
This is a complete airplane with a Continental C75 engine and all instruments. It is damaged, but repairable. I am asking $3,800. Plane is located in Tallahasse, FL. I can be reached at rcouvill@bellsouth.net or 337-232-8789, or 337-896-3166. Thanks for your help.
Rickey Couvillion
(2/13/02) Grant,
Thank you so much for letting me place the ad, if it does not take up too
much space you can just post it as written. There are several radiators
also, the one that was on it (with a nice impression of the water pump
pulley) and two others that could be adapted but, I suppose, that can come
under the heading of "more" as it is mentioned. There is still more, but I
can describe all of that to anyone who is interested. Probably the best
email address to use is my personal one, dixon71@aol.com, I can access that
one more frequently, esp. on the weekends and such. The Pietenpol items are
located in CA, for those who are interested in knowing that.
Thank you again very much.
Tom
Dear Grant,
I have for sale some items which may be of interest to Pietenpol fans out there. As you may know, 688Y was Pete Bower's 1930 built airplane, he discovered it in a foundry and began the "restoration" in the late 60's, at that time he restored it to as close to the original 1930 configuration as possible,then he later sold the ship and it was damaged in a landing accident in about 1972, or so.
What I have for sale is the original 1930 airframe, somewhat damaged by the accident (it struck a fence post and spun the plane around, eventually going on its back, oops), a second fuselage which could be used to replace the original if so desired, (the original can be repaired if wanted) new wing ribs, new streamline tubing for new struts, a St. Croix propeller (new), a genuine Funk conversion of the Model B, (the engine that Peter used in the plane when he flew it, quite rare), a nice pair of genuine antique aircraft style wire wheels (again, ones Pete used), some rare 20's instruments, very neat smooth white rubber tires for the wheels, and more. Oh, a second Model A engine partially set up to be used in a Piet. There is really lots of stuff here, almost two airplanes, or one and plenty of spares. I would like to list these items for sale on your web site if that is possible. Please let me know if that is possible and what it may involve. I am asking $11,500 for this collection, it is probably worth much more than that but I would like to see it go to a "good" home where it can be used and appreciated. It is available as a package only, please understand.
Thank you very much for any assistance you can provide me.
Sincerely,
Tom Dixon
(2/7/02) FOR SALE Pietenpol project, on the gear. Covered and painted. Rebuilt 65HP Continental, Cleaveland wheels and brakes. Wings ready to attach. Strut material included. All instruments except airspeed No prop. This ia a nice project. Asking 10K. Located at Shirley Williams Airport in Kingsland Tx. (44TE) Contact Mel Barr at 915-388-6218.
Mel Barr
1320 Steen Rd.
Kingsland, Tx. 78639
melbarr@thegateway.net
(12/29/01) For sale Pietenpol Air Camper tail assembly and all wing ribs. All wood was purchased from Wicks Aircraft Supply- $600 or. Call 814-833-5792 -- Erie, Pa.
(12/06/01) For Sale GN-1 Aircamper Project Less engine & prop, & instruments. fuselage...wings...tail group...control surfaces & stick& rudder&trim controls are all complete... Ready to Cover... Sitting on i't gear, 6.00x6 tires... Made from plans with all new matterials, (a/c specs.) I don't have the time to complete it and would like to see it go to a good home. If interrested I can be contacted in the evenings (E.S.T) at... 905-335-2226 or any other time at 905-517-8114. or E-mail at flight_path@msn.co
Ask for Bruce. A/C is located in Burlington, Ontario, Canada
(11/19/01) Hi Grant,
My dad (Kyle Bradford) asked me to email you and see if you could help him locate some motor mounts for a Lyc. 0-145 for his Sky Scout. If you can help we sure would appreciate it. Thank you.
Mike Bradford
mbradfo31@msn.com
(11/15/01) Pietenpol A/C built to BP plans. Covered, painted. Needs engine, wing struts, cabanes, exterior rigging. Nice looking plane -- this is my second one. New VW diesel radiator. Mahogany brass tipped Paragon prop, Model "A" parts. $4,000.00.
Ron Lustig 773-529-1431 (Chicago)
10/24/01 Piet Project For Sale: Finished fuselage and tail feathers, on gear and running with a Continental 85hp (low time). Ribs are finished, have spruce blanks for spars (3 piece wing).
Cleavland hubs, disk brakes with spoked wheels. Most materials to complete except wing covering. Easy finish. Beautifull workmanship. Asking $8500 OBO, can send or email pictures and answer any furthur questions.
Brad Schultz
Sparta, WI
608-269-0569
brsch@centurytel.net
(5/30/01) Project Pietenpol for sale Fuselage built, some ribs and the wing jig are here. Pietenpol plans #648 included. A Toyota engine is installed. 6 pieces of Spruce wood 14 feet long are also included Asking Price $1,500.00 Please come see at Midfield Aviation Apple Valley, California or call 760-247-5766.
(5/23/01) Dear Grant:
Hi my name is Rick Rager and I live in Wellington KS. 30 miles south of Wichita.
I have a complete 1932 plans built long fuse, vertical stab and rudder, horiz stab and elevators ready for varnish and covering, 4 ribs and rib jig, center section (3 piece wing) spars built, control stick built, 172 Cessna axles, wheels, new bearings, new tubes and good tires, I have approx. 282 hours and $1600.00 invested. Would like to get at least $1600.00 out of it,
but would consider reasonable offer.
Also if anyone is interested I have a Zing Ultralite approx. 90% completed
for sale.
Phone 316-326-5655
Thanks a lot,
Rick Rager
|| BPA's home page ||
|| Grant's (pretty good) home page ||
Another web page by Grant MacLaren
|
